Kino Flo FreeStyle 41GT LED System
- Removable LED panel with center mount and molded corner mounts
- Light enough to mount on kit stand or be hand-held
- Universal mains voltage or 24VDC
- Color-correct with high color rendering index (CRI 95)
- Centre Mount with 360° Rotation
- Colour Gels/Hue and RGB Modes
- FX (Special Effects) Modes
FreeStyle LED Features
- Color Rendering TLCI >96, CRI >96, TM-30-18 Rf=95, Rg=103
- Kelvin presets
- Dial-in color temperature control between 2500K-9900K
- Green/Magenta Control
- Hue angle and Saturation adjustments
- Kino Flo presets and Gels
- RGB control
- CIE xy
- FX Control
- Camera Profiles LUTs
- Color Space
- Works with Apps with predetermined RGB presets or color wheels
- Can use preset buttons to store custom Kelvin settings
- Light levels do not change when selecting Kelvin settings
- No color shift while dimming
- Universal input 100VAC-240VAC or 24VDC
- Energy efficient, draws 0.65A, 230VAC and 6.25A, 24VDC
- Flicker-free, quiet operation
- Full range onboard and DMX dimming
- DMX wireless link (Lumen Radio®)
- DMX Auto Terminate
FreeStyle 41GT LED Dmx Design
FreeStyle 41GT LED System
The FreeStyle 41GT LED System consists of four components: FreeStyle 41GT LED Fixture (fig. 1), Mounting Plate (fig. 2), FreeStyle 152 LED DMX Controller (fig.3), and Extension Cable (fig.4). It was designed in this manner to allow the greatest flexibility in lighting solutions for challenging situations.
FreeStyle 41GT LED Fixture
The FreeStyle 31GT LED Fixture is comprised of a Gaffer Tray, a removable LED panel and a 90° Honeycomb Louver. The Louver is held in place with Velcro and can give direction to the light or be removed to give broad coverage over an area. The LED panel can be removed from the Gaffer Tray by pressing the locking pin and turning the thumbscrew. The Gaffer Tray has a twist-on mating plate to accept a twist-on KinoGrip mount. The LED panel also has a twist-on mating plate to accept a removable twist-on mount and has molded corners for additional rigging options.
The Gaffer Tray holds the removable LED panel. The KinoGrip center mount and the LED controller can be attached. The tray allows for a smaller profile fixture without having the need to bend the plastic barndoors back. When the mount and controller are removed, the tray can be screwed into the wall or ceiling through its screw points.
The FreeStyle 31GT LED fixture’s lightweight modular design includes a Gaffer Tray, a removable LED panel, a KinoGrip mount and a removable 90° louver. The Louver is held in place with Velcro fasners. The twist-on removable center mount can mount the fixture easily to a stand. When the mount is removed, the fixture is flat and can be hand-held or screwed to the wall or ceiling through its eyelets.
The removable LED panel also has a twist-on mating plate to accept the twist-on mount. The four molded corners offer additional rigging points for rope hanging, for example. With the removable KinoGrip mount, the fixture or LED panel can be hand-held. The FreeStyle 152 LED DMX Controller can also be strapped to the back of the fixture with Velcro or used remotely with an extension cable.
The FreeStyle 152 LED DMX controller
The FreeStyle LED controller can operate the Freestyle 21 fixture remotely with a 25ft extension cable or can drive the panel directly when mounted to the back of the fixture. The Freestyle controller (LED-152X), includes standard DMX in/out ports for cable as well as wireless DMX connectivity (Lumen Radio®). The controller features universal AC voltage input 100-240vac as well as a 3-Pin XLR for 24vdc operation.
The FreeStyle 152 LED DMX controller firmware is updatable from a PC using the Mini B USB data port. For the latest True Match Firmware update available, please contact us.
A) On /Off: On = Green light displayed. Off = Red light displayed. The display and all menu settings can be operated while the power button is in the Off position, as long as power is applied to the controller. The On /Off button only controls the light source.
B) Menu: Provides access to menu options such as General settings, Reset, DMX and DMX Wireless settings, Camera LUTs & Color Space.
Shortcut: While on control screen, press and hold for 3 seconds to switch through menus (White, Gels & Hue, RGB, CIE xy, FX).
C) Preset Buttons: Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. G/M default value is 000. Usera can also use these preset buttons to store custom Kelvin and G/M settings.
D) Display: Provides access to Dim, Kelvin, G/M, and DMX channel. Factory reset will show: Dim = 10%, Kelvin = 2700K, G/M = 000, DMX = 001.
E) Lock: Press the Lock button to disable all buttons and Control knob. Press for 3 seconds to restore displayed presets to default factory settings.
F) Mode: Press to navigate from Dim to Kelvin and G/M settings. When in sub-menus, pressing Mode always returns you to main display. When DMX is applied, use Mode to access DMX channel on main display. Shortcut: Long press will bring you back one step.
G) Data Port: Mini B USB for firmware updates.
H) Control Knob: Manually adjusts Dim, Kelvin, G/M levels and DMX address. Press the Control knob to toggle between Fine and Coarse increments or when selecting options within menus.
The FreeStyle 152 LED DMX Controller is powered AC and includes an IEC connection. The controller includes universal input from 100-240VAC. A 2 mtr lead with Locking IEC and Australian mains plug is included.
The FreeStyle 152 LED DMX Controller can also be operated on 24VDC (input range 18-36VDC) through a 3-Pin xlr. The pin polarity is:
Pin # 1 – Ground
FreeStyle LED Extension Cable
The Freestyle Extension Cable allows the fixture to be operated remotely from the controller. Up to 15 metres (2 x 7.5mtr) of extension cable can be used between the fixture and the Controller.
Kino Flo True Match® LED Advantages
The FreeStyle LED DMX operates on universal AC power or battery power and needs only 0.65A at 230VAC or 6.25A at 24VDC. The FreeStyle LED’s cost savings from low energy and long LED life continues Kino Flo’s reputation as an environmentally friendly lighting company.
Long LED Life
LED’s are well known as being energy efficient, lasting for thousands of hours. While Kino Flo’s FreeStyle LED also has a long LED life, the FreeStyle LED’s unique design will maintain its color-correct color temperature.
True Match® Color-Correct
As with all Kino Flo products, the FreeStyle LED has been specially formulated to match the spectral distribution curves of today’s HD film and video equipment. The FreeStyle LED has high color rendering. Even while dimming, the fixture is flicker-free and without color shift.
Heat Management Design
For Kino Flo, heat management is a critical design element of fixture design. The physical heat or buildup heat within the LED fixture will directly influence the color temperature, lumen performance and life of an LED. The FreeStyle LED’s unique design operates coolly, consumes very low energy and is properly ventilated to maintain a stable color temperature. A well maintained temperature extends the lumen maintenance, color temperature and life of an LED.
Kino Flo True Match® Color
Kino Flo True Match™ Firmware provides state of the art features including dial-in variable color temperature control; full-range dimming without color shift; four programmable presets; four menu options, one white, two color menus and FX (Effects).
The “white menu” gives the user access to Dimming, Kelvin, and Green/Magenta control channels, with kelvin range from 2700K to 5500K. In the first color menu, the Kelvin range is from 2500K tungsten to 9900K daylight with three additional channels, Gel, Hue Angle and Saturation. The Gel channel includes Kino Flo presets such as blue & green screen, sodium vapor, mercury vapor and over 100 well-known lighting gels. The user can also dial in any color through Hue Angle and Saturation. The second color menu provides individual red, green, blue (RGB) control. This menu is a great way to work with Apps with predetermined RGB presets or color wheels.
The FX (Effects) menu allows access to popular effects such as Candle, Fire, TV, Police, Lightning, Paparazzi, Pulse and Scroll. When on the desired effect, there are several pre-sets as well as control parameters that can be altered. For example, in the Lightning effect there is a “Storm” and “Frankenstein” preset, but it is possible to change Rate to provide additional variation.
FreeStyle Mounting Options
One of the design features of the FreeStyle LED Fixture is the twist-on removable Center Mount. When it's on, the fixture mounts easily to a light stand; when it's off, the fixture is flat and can be hand-held, or hidden in a space too small to place a stand-mounting fixture. When the mount is removed, the grommet holes along the edge of the fixture are designed to allow the fixture to be screwed onto a wall or ceiling through its eyelets. The remote Controller can also be attached to the back of the fixture with Velcro or operate remotely with an extension cable.
The FreeStyle removable LED panel also has its own mating plate to accept the twist-on mount plate. The LED panel can be hand-held with the KinoGrip mount and also has molded corners as rigging points for rope hanging, for example.
The standard mount comes with a KinoGrip Mount w/ Baby Receiver (MTP-BG41) that mounts onto a baby stand. The ball and socket mount allows the fixture to be oriented in a broad range of angles. With the KinoGrip, the lightweight fixture or removable LED panel can be hand-held.
There is also a short version and mount w/ 3/8" pin (see below) available as accessories. The yellow wire loops are there to provide attachment points for a safety chain.
|(From left to right) MTP-BG41, MTP-BG41S, MTP-KG41|
Mounting options include MTP-KG41 Mount with 3/8" Pin (10mm); MTP-BG41S Mount with Baby Receiver Short (16mm).
|(From left to right) MTP-LBS, MTP-LBC, MTP-L|
Note: The lollipops on all of these mounts are interchangeable.
Kino Offset w/ Baby Receiver
Light Control and Diffusion
Snapbag and Snapgrid
The FreeStyle LED DMX operates on three DMX channels (in White mode) using DMX512 (six DMX channels in Color mode). The first channel operates dimming; the 2nd channel operates Kelvin color temperature control; the 3rd channel operates the Hue.
In Gels/Hue Color mode: 4th channel operates the Gel; 5th channel operates the Hue angle and the 6th channel operates the Saturation. In RGB Color mode, 4th channel operates Red; 5th channel operates Green and the 6th channel operates Blue.
In CIE xy mode, first channel operates dimming; 2nd channel operates x; the 3rd channel operates y. For FX (Effects) mode, see
The FreeStyle 152 LED DMX Controller includes a built-in Lumen Radio receiver and can be operated wirelessly with a Lumen Radio transmitter (sold separately). Wireless is an option to using DMX cables. For more information on Lumen Radio Receiver/Transmitter, see www.lumenradio.com.
Fixture - 127 x 20 x 6.5
Controller - 37 x 10 x 8
FreeStyle 21 Kits
FreeStyle 31 Kits