Kino Flo FreeStyle 4ft LED Tube (4 Pack)
FreeStyle LED Features
- Color Rendering TLCI >96, CRI >96, TM-30-18 Rf=95, Rg=103
- Kelvin presets
- Dial-in color temperature control between 2500K-9900K
- Green/Magenta Control
- Hue angle and Saturation adjustments
- Kino Flo presets and Gels
- RGB control
- CIE xy
- FX Control
- Camera Profiles LUTs
- Color Space
- Works with Apps with predetermined RGB presets or color wheels
- Can use preset buttons to store custom Kelvin settings
- Light levels do not change when selecting Kelvin settings
- No color shift while dimming
- Universal input 100VAC-240VAC or 24VDC
- Energy efficient, draws 0.65A, 230VAC and 6.25A, 24VDC
- Flicker-free, quiet operation
- Full range onboard and DMX dimming
- DMX wireless link (Lumen Radio®)
- DMX Auto Terminate
FreeStyle 41 LED Dmx Design
FreeStyle 41 LED System
The FreeStyle 41 LED System consists of four components: FreeStyle 41 LED Fixture (fig. 1), Mounting Plate (fig. 2), FreeStyle 152 LED DMX Controller (fig.3), and Extension Cable (fig.4). It was designed in this manner to allow the greatest flexibility in lighting solutions for challenging situations.
FreeStyle 31 LED Fixture
The FreeStyle LED Fixture includes built-in barndoors and is comprised of a removable LED panel and Louver. The Louver is held in place with Velcro fasteners. The LED panel can be removed from the fixture housing by pressing the locking pin and turning the thumbscrew. The fixture has a twist-on mating plate to accept a twist-on mount. The LED panel also has a twist-on mating plate to accept a removable twist-on mount and has molded corners for additional rigging options.
The FreeStyle LED fixture’s lightweight modular design includes built-in barndoors, a removable LED panel and a removable louver. The Louver is held in place with Velcro and can give direction to the light or be removed to give broad coverage over an area. The twist-on removable center mount can mount the fixture easily to a stand. When the mount is removed, the fixture is flat and can be hand-held or screwed to the wall or ceiling through its eyelets. The removable LED panel also has a twist-on mating plate to accept the twist-on mount. The four molded corners offer additional rigging points for rope hanging, for example. With the removable KinoGrip mount, the fixture or LED panel can be hand-held. The FreeStyle 152 LED DMX Controller can also be strapped to the back of the fixture with Velcro or used remotely with an extension cable.
The FreeStyle 152 LED DMX controller
The FreeStyle LED controller can operate the Freestyle 21 fixture remotely with a 25ft extension cable or can drive the panel directly when mounted to the back of the fixture. The Freestyle controller (LED-152X), includes standard DMX in/out ports for cable as well as wireless DMX connectivity (Lumen Radio®). The controller features universal AC voltage input 100-240vac as well as a 3-Pin XLR for 24vdc operation.
The FreeStyle 152 LED DMX controller firmware is updatable from a PC using the Mini B USB data port. For the latest True Match Firmware update available, please contact us.
A) On /Off: On = Green light displayed. Off = Red light displayed. The display and all menu settings can be operated while the power button is in the Off position, as long as power is applied to the controller. The On /Off button only controls the light source.
B) Menu: Provides access to menu options such as General settings, Reset, DMX and DMX Wireless settings, Camera LUTs & Color Space.
Shortcut: While on control screen, press and hold for 3 seconds to switch through menus (White, Gels & Hue, RGB, CIE xy, FX).
C) Preset Buttons: Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. G/M default value is 000. Usera can also use these preset buttons to store custom Kelvin and G/M settings.
D) Display: Provides access to Dim, Kelvin, G/M, and DMX channel. Factory reset will show: Dim = 10%, Kelvin = 2700K, G/M = 000, DMX = 001.
E) Lock: Press the Lock button to disable all buttons and Control knob. Press for 3 seconds to restore displayed presets to default factory settings.
F) Mode: Press to navigate from Dim to Kelvin and G/M settings. When in sub-menus, pressing Mode always returns you to main display. When DMX is applied, use Mode to access DMX channel on main display. Shortcut: Long press will bring you back one step.
G) Data Port: Mini B USB for firmware updates.
H) Control Knob: Manually adjusts Dim, Kelvin, G/M levels and DMX address. Press the Control knob to toggle between Fine and Coarse increments or when selecting options within menus.
The FreeStyle 152 LED DMX Controller is powered AC and includes an IEC connection. The controller includes universal input from 100-240VAC. A 2 mtr lead with Locking IEC and Australian mains plug is included.
The FreeStyle 152 LED DMX Controller can also be operated on 24VDC (input range 18-36VDC) through a 3-Pin xlr. The pin polarity is:
Pin # 1 – Ground
FreeStyle LED Extension Cable
The Freestyle Extension Cable allows the fixture to be operated remotely from the controller. Up to 15 metres (2 x 7.5mtr) of extension cable can be used between the fixture and the Controller.
Kino Flo True Match® LED Advantages
The FreeStyle LED DMX operates on universal AC power or battery power and needs only 0.65A at 230VAC or 6.25A at 24VDC. The FreeStyle LED’s cost savings from low energy and long LED life continues Kino Flo’s reputation as an environmentally friendly lighting company.
Long LED Life
LED’s are well known as being energy efficient, lasting for thousands of hours. While Kino Flo’s FreeStyle LED also has a long LED life, the FreeStyle LED’s unique design will maintain its color-correct color temperature.
True Match® Color-Correct
As with all Kino Flo products, the FreeStyle LED has been specially formulated to match the spectral distribution curves of today’s HD film and video equipment. The FreeStyle LED has high color rendering. Even while dimming, the fixture is flicker-free and without color shift.
Heat Management Design
For Kino Flo, heat management is a critical design element of fixture design. The physical heat or buildup heat within the LED fixture will directly influence the color temperature, lumen performance and life of an LED. The FreeStyle LED’s unique design operates coolly, consumes very low energy and is properly ventilated to maintain a stable color temperature. A well maintained temperature extends the lumen maintenance, color temperature and life of an LED.
[ 2J ToolBox: Error: Looks like plugin uninstalled, but this instance require this plugin for workflow ]