Kino Flo 4ft T8 Kino KF32
|The Kino Flo T8’s deliver the same broad color spectrum that has become the mainstay for the motion picture and photographic industries. When used as set practicals, for normal office or home environments, the Kino Flo T8 lamps color reproduction is second to none. Corporate teleconferencing or simple video chatting at your computer will benefit from the high color rendering, natural light quality not found in off-the shelf fluorescents.|
|F32/T8||48” (1200mm)||1” (26mm)||G13 Med Bi-pin||32||2040|
What is the difference between Kino Flos and store bought fluorescents?
Kino Flo True Match® lamps are the only High Output (HO) fluorescent lamps designed to correspond to the spectral sensitivity of film and digital imaging. In 1995 Kino Flo was awarded an Academy Award for Technical Achievement for its unique lamp engineering and fixture designs.
Is there a color difference between Kino Flo lamps operating in an architectural fixture vs. a Kino Flo fixture?
Kino Flo’s 4ft and 2ft T12 800ma lamps can be used in architectural fixtures. Due to the lower operating currents of architectural fixtures, the Kino Flo lamps may appear slightly more magenta to the eye than the same lamps in Kino Flo fixtures. However, on film, video or digital the light quality of the two fixture types matches.
What is the difference between single pin lamps and double pin lamps?
Single pin lamps are referred to as Slimline fluorescents. Slimline lamps will not operate on Kino Flo HO ballasts. Most double pin (bi-pin) lamps will operate on Kino Flo ballasts. However, Kino Flo HO ballasts will shorten the life span of store bought bi-pin lamps.
Do Kino Flo lamps operate in architectural High Output (HO) fixtures?
Architectural HO fixtures can range in lengths of 4ft, 6ft and 8ft. They use a lamp that has a double recessed bi-pin end cap. It looks similar to a single pin lamp but the pin is hollow and oval shaped. Kino Flo 6ft and 8ft lamps can be modified with an accessory Double Recessed End Cap that slides over the lamps normal medium bi-pins. However, Kino Flo 4ft lamps cannot be modified this way because architectural 4ft HO lamps are three inches shorter.
Why do some lamps in a fixture seem slightly different?
Slight variations in appearance are common from lamp to lamp. The age of a lamp and the batch number can account for variations. When evaluating color temperature, position the color meter at least 24 inches (.5 meter) from the fixture or lamp. Holding the meter too close may result in inaccurate readings.
What does High Output (HO) mean?
Why do my lamps read green on my color meter?
Tip: If a 4ft lamp is operating too hot and the color is shifting green, move the select switch to Std (or 2ft). This will reduce the lamp current and drop the green spike.
Dimming vs. SwitchingAll fluorescent lamps will drift toward magenta when dimmed. The shift is continual as the lamp physically cools. Kino Flo recommends only dimming one f-stop to ensure good color. The Select Ballast series changes light levels without affecting color balance by switching lamps on and off, and by using the 2ft/4ft select switch, which adjusts the lamps by 1/2 f-stop.
How do color meters read fluorescent lamps ?
Unfortunately, color meters available to cinematographers are far from being scientifically accurate when reading fluorescents. They act as a great comparative tool to determine differences between twogiven light sources but are inadequate in providing definitive data. You will rarely find two color meters, even if they are the same make and model, that provide equal data. Results between meters may be similar but not identical.
True Match Lamp Chart (47KB)
Kino Flo Lamp Data (550KB)